Home > Products > Diagnostic Color Display > MMD-4300C
The 30" MMD-4300C integrates multiple viewing modes and color-to-grayscale technology, enabling flexible viewing options. MMD-4300C is ideal for 3D color rendering and image fusion applications. The MMD-4300C is also awarded by Taiwan Excellence 2008, the highest accolade awarded to products that encapsulate innovalue.
       Features
 
   
• 30" color TFT LCD
• Resolution-2560(H) x 1600(V)
• Max. luminance: 370cd/m2
  Max. calibrated luminance: 250cd/m2
• GrayEasy® 30-bit deep color technology
• Built-in front sensor for DICOM conformance and auto-dimming function
• Selectable Gamma 1.8,2.0,2.2 and color temperature settings
• Single 4MP and dual 2MP viewing mode setup
• Smart OSD for easy monitor control
• Intelligent display mode auto adjustment with graphic card auto detection
• Intelligent color-to-gray conversion for grayscale applications
• IPXX/IPX2 compliant
Download
+ Datasheet
+ Catalog
+ Driver
     Intelligent Color Display Solutions
GrayEasy® 30-bit Deep Color Technology
30-bit color image (10-bit for each RGB element) can be displayed on MMD-4300C without any image loss. Through the unique GrayEasy® technology, it's unnecessary to replace the monitors for future HDMI™ 1.3 supported deep color display capabilities.
 
Multiple Viewing Modes and Color to Grayscale Technology
PACSmate has designed multiple viewing setups and color to grayscale technology into our 4MP MMD-4300C color display,bringing the intelligence and flexibility to your imaging workstation. Through color to grayscale technology,the RGB signal received can be accurately reproduced in grayscale via conversion function. PACSmate allows you to choose within a wide range of viewing modes for your PACS applications
Single Viewing Mode
In single viewing mode, the MMD-4300C is displayed as a single 4MP monitor, either in color or in grayscale mode.
Single 4MP in color mode Single 4MP in grayscale mode
Dual Viewing Mode
In dual viewing mode, MMD-4300C is configured to display as seamless dual 2MP monitor by two DVI signal inputs. With color to grayscale technology, MMD-4300C can be viewed as multiple modes without change to your PACS configuration.The independent Look-Up-Table for DICOM and Gamma calibration ensures the best display quality for diagnostic applications.
Dual portrait 2MP color mode Dual portrait 2MP grayscale mode
Dual portrait 2MP grayscale/color mode Dual portrait 2MP color/grayscale mode
Auto-Dimming for Ambient Light Adjustment
With the front sensor that auto-detects the amount of light in the viewing environment and auto-adjusts the brightness of the display, the auto-dimming function helps create better diagnostic experience under proper light condition and extend backlight lifetime.
 
User Selectable Gamma Settings and Color Temperature Settings
PACSmate provides you with flexible Gamma settings and color temperature settings for side-by-side image comparison in dual-viewing modes. The independent
Gamma settings (Gamma 1.8,2.0,2.2) and color temperature settings (6500K, 9300K) provides flexible display modes for images from different modalities.		  
 
100% Compatible with VESA DDC/CI Protocol
 

MMD-4300C is implemented with the VESA DDC/CI protocol and the standard VESA Monitor Control Command Set (MCCS). The MMD-4300C allows easier two-way communications with the host PC with only a DVI cable. Additional serial or USB cables are not necessary. Through DDC/CI protocol, the software OSD manages
some MMD-4300C functions remotely. This reduces the maintenance cost for the end user. PACSmate also provides software OSD customization services with a command library and customer defined MSSC command programming supports for easier software development.

Various software OSD functions:
• Power mode control – On/Off
• Display mode selection: 4MP/2MP, color/monochrome
• Gamma and color temperature selection
• Luminance selection
• DICOM/ Gamma Look-Up-Table selection
• Monitor Information

Built-in Front Sensor for Continuous DICOM Conformance

PACSmate has designed a built-in, front-mounted sensor which continually monitors the luminance output to ensure consistent images over time.
Built-in Front Sensor

IPX2 Compliance
The whole enclosure of MMD-4300C is compliant with IPX2 waterproof standard. The MMD-4300C can be used in the operating room where is humid and waterproof is considered important.
    Specifications
PACSmate 4MP MMD-4300C
Drive System a-Si TFT active matrix Default gamma Gamma 2.2
Display area (H x V) 641.3mm x 400.8 mm LUT 10-bit for each RGB
Diagonal size of display 75.6cm (30.0 inches) USB 2.0 hub 1 upstream/
2 downstream
Resolution (H x V) 2560 x 1600 Signal input Dual link DVI-D (digital)
Display color 16,777,216 colors Membrane keypad Yes
Pixel pitch (H x V) 0.2505mm x 0.2505 mm Sub-pixel pitch (H x V) 0.0835mm x 0.2505 mm
Pixel format RGB (Red dot, Green dot, Blue dot) vertical stripe Max. Luminance (calibrated) 250cd/m2
Luminace-max. 370cd/m2 Contrast ratio 1000:1 (typical)
Backlight 16 CCFL Physical dimensions
(H x W x D)		 With stand: 522mm x 736mm x 266 mm (landscape)
Without stand: 480mm x 736mm x 76 mm (landscape)
Viewing angle 178°(H)/178°(V) Power adapter
Input voltage range		 100VAC-240VAC
Response time (Ton + Toff) 12ms (typical) Power adapter
Input frequency range		 47Hz-63Hz
Polarizer surface/ hardness Antiglare/ 3H Power adapter
Input AC current		 2.0A (max). at 90VAC
Operating temperature 10°C ~ 35 °C Power adapter
Power output		 24VDC, 6.25A, 150W (max)
Operation relative humidity 30% ~ 75%
Non-condensing		 Storage temperature 0°C ~ 45 °C
Storage/ Transportation
Relative humidity		 10% ~ 95%
Non-condensing		    
   
Graphic Card Solutions
 
     Ordering information
Part No. Description
MMD-4300C 4 megapixel, 30" color LCD monitor with IPX2 housing
MMD-4300Cx 4 megapixel, 30" color LCD monitor with IPXX housing
     Packing List
Description Amount
PACSmate Series medical LCD monitor 1
Monitor stand 1
Power Cord (US x 1, EU x 1) 1
DVI-D Signal Cable 1
USB Cable 1
Utility CD-ROM
(for user's manual and software utility)		 1